| Nì | PCB cruaidh (HDI) | PCB sùbailte | PCB Rigid-Sùbailte |
| Sreath as motha | 2-68L | 12L | 68L |
| Lorg/Àite as ìsle san t-sreath a-staigh | 1.4/1.4 mìle | 2/2 mìle | 2/2 mìle |
| Lorg/Àite as ìsle san t-sreath a-muigh | 1.4/1.4 mìle | 3/3 mìle | 3/3 mìle |
| Sreath a-staigh Max Copar | 6oz | 2oz | 6oz |
| Sreath a-muigh as motha de chopar | 6oz | 3oz | 6oz |
| Drileadh Meacanaigeach Min | 0.15mm/6mil | 0.15mm | 0.15mm |
| Drileadh Laser Min | 0.05mm/3mil | 0.05mm | 0.05mm |
| Co-mheas Taobh as Motha (Drileadh Meacanaigeach) | 20：1 | / | 20：1 |
| Co-mheas Taobh as Motha (Drileadh Leusair) | 1:1 | 1:1 | 1:1 |
| Co-thaobhadh Eadar-fhilleadh | +/-0.254mm (1mil) | ±0.05mm | ±0.05mm |
| Fulangas PTH | ±0.075mm | ±0.075mm | ±0.075mm |
| Fulangas NPTH | ±0.05mm | ±0.05mm | ±0.05mm |
| Fulangas Countersink | +0.15mm | ±0.15mm | ±0.15mm |
| Tiughas a' Bhùird | 0.20-12mm | 0.1-0.5mm | 0.4-3mm |
| Fulangas Tiughas a’ Bhùird ( |
±0.1mm | ±0.05mm | ±0.1mm |
| Fulangas Tiughas a' Bhùird (≥1.Omm) | ±8% | / | ±10% |
| Meud a’ Bhùird as ìsle | 10 * 10mm | 5 * 5mm | 10 * 10mm |
| Meud a’ Bhùird as motha | 1200mm * 750mm | 500 * 1200mm | 500 * 500mm |
| Co-thaobhadh Iomlan | +/-0.075mm (3mil) | ±0.05mm | ±0.1mm |
| Mo BGA | 0.125mm (5mil) | 7 mìle | 7 mìle |
| An SMT agam | 0.177 * 0.254mm (7 * 10mil) | 7 * 10 mìle | 7 * 10 mìle |
| Fuadach Masg Sàdair Min | 1.5 mìle | 2 mìle | 1.5 mìle |
| Mo Dhama Masg Sàdair | 3 mìle | 3 mìle | 3 mìle |
| Uirsgeul | Geal, Dubh, Dearg, Buidhe | Geal, Dubh, Dearg, Buidhe | Geal, Dubh, Dearg, Buidhe |
| Leud/Àirde an Uirsgeul as ìsle | 4/23 mìle | 4/23 mìle | 4/23 mìle |
| Radius Lùbadh Min (Bòrd Singilte) | / | 3-6 x Tiughas a’ Bhùird | Tiughas Bùird Sùbailte 3-7 x |
| Radius Lùbadh Min (Bòrd Taobh Dùbailte) | / | 6-10 x Tiughas a’ Bhùird | Tiughas Bùird Sùbailte 6-11 x |
| Radius Lùbadh Min (Bòrd Ioma-fhilleadh) | / | 10-15 x Tiughas a’ Bhùird | Tiughas Bùird Sùbailte 10-16 x |
| Radius Lùbadh Min (Lùbadh Fiùghantach) | / | Tiughas a’ Bhùird 20-40 x | 20-40 × Tiughas a’ Bhùird |
| Leud Fillte Strain | / | 1.5+0.5mm | 1.5+0.5mm |
| Bogha is Tionndadh | 0.005 | / | 0.0005 |
| Fulangas Impedance | Aon-cheann: ±5Ω (≤50Ω), ±7% (＞50Ω) | Aon-cheann: ±5Ω (≤50Ω), ±10% (＞50Ω) | Aon-cheann: ±5Ω (≤50Ω), ±10% (＞50Ω) |
| Fulangas Impedance | Eadar-dhealachadh: ±5Ω (≤50Ω), ±7% (> 50Ω) | Eadar-dhealachadh: ±5Ω (≤50Ω), ±10% (＞50Ω) | Eadar-dhealachadh: ±5Ω (≤50Ω), ±10% (＞50Ω) |
| Masg Sàdair | Uaine, Dubh, Gorm, Dearg, Uaine Matt, Buidhe, Geal, Purpaidh | Masg Sàdair Uaine/PI Dubh/PI Buidhe | Uaine, Dubh, Gorm, Dearg, Uaine Matt |
| Crìochnachadh Uachdar | Plàtadh òir dealanach, ENIG, Plàtadh òir cruaidh, Meur Òir, Airgead bogaidh, Staoin bogaidh, HASL LF, OSP, ENEPIG, Plàtadh òir bog | Plàtadh òir dealanach, ENIG, Plàtadh òir cruaidh, Meur Òir, Airgead bogaidh, Staoin bogaidh, OSP, ENEPIG, Plàtadh òir bog | Plàtadh òir dealanach, ENIG, Plàtadh òir cruaidh, Meur Òir, Airgead bogaidh, Staoin bogaidh, HASL LF, OSP, ENEPIG, Plàtadh òir bog |
| Pròiseas Sònraichte | Via air a thiodhlacadh/dall, clais ceum, ro-mhòr, strì/comas air a thiodhlacadh, cuideam measgaichte, RF, meur òir, structar N+N, copar tiugh, drileadh cùil, HDI (5+2N+5) | meur òir, lamination, glaodh giùlain, film dìon, cruinneach meatailt | Via fon talamh/dall, clais ceum, ro-mhòr, strì/comas fon talamh, cuideam measgaichte, RF, meur òir, structar N+N, copar tiugh, drileadh cùil |
|  |  |  |
