| ihe | PCB siri ike (HDI) | PCB na-agbanwe agbanwe | PCB siri ike-Flex |
| Oke oyi akwa | 2-68L | 12L | 68L |
| Obere ihe dị n'ime/Oghere | 1.4/1.4mili | 2/2m | 2/2m |
| Mpụta oyi akwa obere ihe nrịbama/oghere | 1.4/1.4mili | 3/3m | 3/3m |
| Ọla kọpa dị n'ime | 6oz | 2oz | 6oz |
| Ọkpụkpọ Max Ọla Kọpa | 6oz | 3oz | 6oz |
| Min Mechanical Mkpọchi | 0.15mm/6mil | 0.15mm | 0.15mm |
| Min Laser Mkpọchi | 0.05mm/3mil | 0.05mm | 0.05mm |
| Oke akụkụ kachasị elu (Mkpọpụta igwe) | 20:1 | / | 20:1 |
| Oke akụkụ kachasị elu (Ịkpọ nkụ laser) | 1:1 | 1:1 | 1:1 |
| Nhazi nke oyi akwa n'etiti | +/-0.254mm(1mil) | ±0.05mm | ±0.05mm |
| Nnwere Onwe PTH | ±0.075mm | ±0.075mm | ±0.075mm |
| Nnwere Onwe NPTH | ±0.05mm | ±0.05mm | ±0.05mm |
| Nnwere Onwe nke Mgbochi Mkpọchi | +0.15mm | ±0.15mm | ±0.15mm |
| Ọkpụrụkpụ nke osisi | 0.20-12mm | 0.1-0.5mm | 0.4-3mm |
| Ntachi Obi nke Okpukpu nke Board ( |
±0.1mm | ±0.05mm | ±0.1mm |
| Ntachi Obi nke Okpukpu Okpukpu (≥1.Omm) | ±8% | / | ±10% |
| Nha obere bọọdụ | 10 * 10mm | 5 * 5mm | 10 * 10mm |
| Nha Ogbe Kachasị Elu | 1200mm*750mm | 500*1200mm | 500*500mm |
| Nhazi Nhazi | +/-0.075mm (mil 3) | ±0.05mm | ±0.1mm |
| BGA m | 0.125mm (5mil) | 7mile | 7mile |
| SMT m | 0.177*0.254mm(7*10mil) | 7 * 10mili | 7 * 10mili |
| Mwepụ ihe mkpuchi mkpuchi obere | 1.5mile | 2mile | 1.5mile |
| Mmiri Mkpuchi Mkpuchi M | 3mile | 3mile | 3mile |
| Akụkọ ifo | Ọcha, Ojii, Uhie, Odo | Ọcha, Ojii, Uhie, Odo | Ọcha, Ojii, Uhie, Odo |
| Obosara/Ịdị Elu Akụkọ Nkịtị Dị Mkpirikpi | 4/23m | 4/23m | 4/23m |
| Obere Radius nke Na-agbagọ (Otu Oche) | / | Ọkpụrụkpụ osisi 3-6 x | Ọkpụrụkpụ nke osisi na-agbanwe agbanwe 3-7 x |
| Radius nke na-agbagọ obere (Ogwe akụkụ abụọ) | / | Ọkpụrụkpụ osisi 6-10 x | Ọkpụrụkpụ nke osisi na-agbanwe agbanwe 6-11 x |
| Obere Ndagharị (Mpaghara Ọtụtụ Oyi akwa) | / | Ọkpụrụkpụ osisi 10-15 x | Ọkpụrụkpụ nke osisi na-agbanwe agbanwe nke 10-16 x |
| Radius nke na-agbanwe agbanwe (Ngbagọ na-agbanwe agbanwe) | / | Ọkpụrụkpụ osisi 20-40 x | Ọkpụrụkpụ nke osisi 20-40 × |
| Obosara Fillet Ntụ | / | 1.5+0.5mm | 1.5+0.5mm |
| Ụta na Gbagọrọ agbagọ | 0.005 | / | 0.0005 |
| Ntachi Obi | Otu njedebe: ±5Ω(≤50Ω)，±7%(＞50Ω) | Otu njedebe: ±5Ω(≤50Ω),±10%(＞50Ω) | Otu njedebe: ±5Ω(≤50Ω), ±10%(＞50Ω) |
| Ntachi Obi | Ihe dị iche: ±5Ω(≤50Ω)，±7%(＞50Ω) | Ihe dị iche: ±5Ω(≤50Ω),±10%(＞50Ω) | Ihe dị iche: ±5Ω(≤50Ω), ±10%(＞50Ω) |
| Ihe mkpuchi solder | Akwụkwọ Ndụ, Ojii, Anụnụ Na-acha Uhie, Ọcha, Akwụkwọ Ndụ, Agba Oyi, Ọcha, Ojii | Ihe mkpuchi ihe mkpuchi akwụkwọ ndụ akwụkwọ ndụ/PI ojii/PI odo odo | Akwụkwọ Ndụ, Ojii, Anụnụ Na-acha Anụnụ, Uhie, Matt Green |
| Mmecha Elu | Mkpuchi ọlaedo Eiectronic, ENIG, Mkpuchi ọlaedo siri ike, Mkpisi aka ọlaedo, Mkpuchi ọlaọcha, Mmikpu Tin, HASL LF, OSP, ENEPIG, Mkpuchi ọlaedo dị nro | Mkpuchi ọlaedo eletrọniki, ENIG, Mkpuchi ọlaedo siri ike, Mkpisi aka ọlaedo, Silver mikpuo, Tin mikpuo, OSP, ENEPIG, Mkpuchi ọlaedo dị nro | Mkpuchi ọlaedo eletrọnịkị, ENIG, Mkpuchi ọlaedo siri ike, Mkpisi aka ọlaedo, Silver imikpu, Tin imikpu, HASL LF, OSP, ENEPIG, Mkpuchi ọlaedo dị nro |
| Usoro Pụrụ Iche | E liri ya/kpuru ìsì site na, oghere nzọụkwụ, nnukwu nha, iguzogide/ike e liri ya, nrụgide agwakọtara agwakọta, RF, mkpịsị aka ọlaedo, nhazi N+N, ọla kọpa dị arọ, mkpọpu azụ, HDI (5+2N+5) | mkpịsị aka ọlaedo, lamination, ihe nrapado na-eduzi, ihe nkiri nchekwa, dome ígwè | E liri ya/kpuru ìsì site na, oghere nzọụkwụ, nnukwu nha, iguzogide/ike e liri ya, nrụgide agwakọtara agwakọta, RF, mkpịsị aka ọlaedo, nhazi N+N, ọla kọpa dị arọ, mkpọpu azụ |
|  |  |  |
