| Mea | PCB Ma'a'a (HDI) | PCB fetuutuunai | PCB Fa'amautu-Flex |
| Vaega Maualuga | 2-68L | 12L | 68L |
| Vaega i totonu o le Min Trace/Avanoa | 1.4/1.4miliona | 2/2miliona | 2/2miliona |
| Fa'ailoga/Vatea o le Vaega Fa'aitiitiga i Fafo | 1.4/1.4miliona | 3/3miliona | 3/3miliona |
| Vaega i totonu o le Max Copper | 6oz | 2oz | 6oz |
| Apamemea Maualuga i Fafo | 6oz | 3oz | 6oz |
| Min Mechanical Drilling | 0.15mm/6mil | 0.15mm | 0.15mm |
| Min Laser Drilling | 0.05mm/3mil | 0.05mm | 0.05mm |
| Fua Fa'atatau Maualuga (Vili Fa'amekanika) | 20：1 | / | 20：1 |
| Fua Fa'atatau Maualuga (Liloina o le Laser) | 1:1 | 1:1 | 1:1 |
| Fa'atulagaina o le Vaeluaga | +/-0.254mm (1mil) | ±0.05mm | ±0.05mm |
| Onosa'i i le PTH | ±0.075mm | ±0.075mm | ±0.075mm |
| Onosa'i o le NPTH | ±0.05mm | ±0.05mm | ±0.05mm |
| Fa'apalepale i le Countersink | +0.15mm | ±0.15mm | ±0.15mm |
| Mafiafia o le laupapa | 0.20-12mm | 0.1-0.5mm | 0.4-3mm |
| Fa'apalepale i le mafiafia o le laupapa ( |
±0.1mm | ±0.05mm | ±0.1mm |
| Fa'apalepale i le mafiafia o le laupapa (≥1.Omm) | ±8% | / | ±10% |
| Tele o le Laupapa Maualalo | 10*10mm | 5*5mm | 10*10mm |
| Tele o le Laupapa Maualuga | 1200mm*750mm | 500*1200mm | 500*500mm |
| Fa'atulagaina o le Otootoga | +/-0.075mm (3mil) | ±0.05mm | ±0.1mm |
| La'u BGA | 0.125mm (5mil) | 7 miliona | 7 miliona |
| La'u SMT | 0.177*0.254mm (7*10mil) | 7*10miliona | 7*10miliona |
| Fa'amama o le Ufimata Solder Min | 1.5miliona | 2miliona | 1.5miliona |
| O lo'u Solder Mask Dam | 3 miliona | 3 miliona | 3 miliona |
| Tala Fa'asolopito | Pa'epa'e, Uliuli, Mumu, Samasama | Pa'epa'e, Uliuli, Mumu, Samasama | Pa'epa'e, Uliuli, Mumu, Samasama |
| Lapo'a/Maualuga o le Tala Fa'asolopito Maualalo | 4/23miliona | 4/23miliona | 4/23miliona |
| Min Pi'o Radius (Laupapa Tasi) | / | 3-6 x Mafiafia o le Papa | 3-7 x Mafiafia o le Papa Flexbile |
| Min Pi'o Radius (Laupapa Itu Lua) | / | 6-10 x Mafiafia o le Papa | 6-11 x Mafiafia o le Papa Flexbile |
| Min Pi'o Radius (Laupapa Multilayer) | / | 10-15 x Mafiafia o le Papa | 10-16 x Mafiafia o le Papa Flexbile |
| La'ititi o le Pi'o o le La'ititi (Pini'o Fa'aolaola) | / | 20-40 x Mafiafia o le Laupapa | 20-40 × Mafiafia o le Laupapa |
| Lapopo'a o le Fillet o le Fa'asusu | / | 1.5+0.5mm | 1.5+0.5mm |
| Aufana ma Milo | 0.005 | / | 0.0005 |
| Onosa'i i le Impedance | Fa'ai'u Tasi: ±5Ω(≤50Ω)，±7%(>50Ω) | Fa'ai'u Tasi: ±5Ω(≤50Ω),±10%(>50Ω) | Fa'ai'u Tasi: ±5Ω(≤50Ω), ±10%(>50Ω) |
| Onosa'i i le Impedance | Eseesega: ±5Ω(≤50Ω)，±7%(>50Ω) | Eseesega: ±5Ω(≤50Ω),±10%(>50Ω) | Eseesega: ±5Ω(≤50Ω), ±10%(>50Ω) |
| Ufimata Solder | Lanumeamata, Uliuli, Lanumoana, Mumu, Lanumeamata Matt, Samasama, Pa'epa'e, Viole | Ufimata Solder Lanumeamata/PI Uliuli/PI Samasama | Lanumeamata, Uliuli, Lanumoana, Mumu, Lanumeamata Matt |
| Fa'auma o le Laupapa | Ufiufi auro eletise, ENIG, Ufiufi auro malo, Tamatama'ilima Auro, Siliva Fa'atofuina, Apa Fa'atofuina, HASL LF, OSP, ENEPIG, Ufiufi auro vaivai | Ufi auro fa'aeletoronika, ENIG, Ufi auro malo, Tamatama'ilima Auro, Siliva Fa'atofuina, Apa Fa'atofuina, OSP, ENEPIG, Ufi auro vaivai | Ufi auro fa'aeletoronika, ENIG, Ufi auro malo, Tamatama'ilima Auro, Siliva Fa'atofuina, Apa Fa'atofuina, HASL LF, OSP, ENEPIG, Ufi auro vaivai |
| Faiga Faapitoa | Tanu/tauaso e ala i le ala, alavai la'asaga, tele, tete'e/gafatia tanumia, mamafa fefiloi, RF, tamatamailima auro, fausaga N+N, apamemea mafiafia, viliina i tua, HDI(5+2N+5) | tamatamailima auro, lamination, kelu fa'a'au'au, ata puipui, dome u'amea | Tanu/tauaso e ala i le ala, alavai la'asaga, tele, tete'e/gafatia tanumia, mamafa fefiloi, RF, tamatamailima auro, fausaga N+N, apamemea mafiafia, viliina i tua |
|  |  |  |
