| Abu | PCB mai ƙarfi (HDI) | PCB mai sassauƙa | PCB mai tauri-lankwasa |
| Mafi girman Layer | 2-68L | 12L | 68L |
| Ƙananan Layin Ciki/Sarari | 1.4/mil 1.4 | 2/2m | 2/2m |
| Ƙananan Layi/Sarari | 1.4/mil 1.4 | 3/3m | 3/3m |
| Layer na ciki Max Copper | 6oz | 2oz | 6oz |
| Mafi kyawun Takardar Matsakaici na Copper | 6oz | 3oz | 6oz |
| Min hakowa na Inji | 0.15mm/mil 6 | 0.15mm | 0.15mm |
| Ƙaramin hakowa na Laser | 0.05mm/mil 3 | 0.05mm | 0.05mm |
| Matsakaicin Rabon Al'amari (Hakowa na Inji) | 20:1 | / | 20:1 |
| Matsakaicin Rabon Al'amari (Hakoran Laser) | 1:1 | 1:1 | 1:1 |
| Daidaito Tsakanin Layer | +/- 0.254mm(mil 1) | ±0.05mm | ±0.05mm |
| Juriyar PTH | ±0.075mm | ±0.075mm | ±0.075mm |
| Juriyar NPTH | ±0.05mm | ±0.05mm | ±0.05mm |
| Juriyar Kariya | +0.15mm | ±0.15mm | ±0.15mm |
| Kauri na allo | 0.20-12mm | 0.1-0.5mm | 0.4-3mm |
| Juriyar Kauri a Allon ( |
±0.1mm | ±0.05mm | ±0.1mm |
| Juriyar Kauri a Kan Allon (≥1.Omm) | ±8% | / | ±10% |
| Ƙaramin Girman Allon | 10*10mm | 5*5mm | 10*10mm |
| Matsakaicin Girman Allon | 1200mm*750mm | 500*1200mm | 500*500mm |
| Daidaito a Tsarin Zane | +/- 0.075mm(mil 3) | ±0.05mm | ±0.1mm |
| BGA dina | 0.125mm (mil 5) | miliyan 7 | miliyan 7 |
| SMT dina | 0.177*0.254mm(7*mil 10) | 7 * 10m | 7 * 10m |
| Ƙaddamar da Mask ɗin Solder na Ƙananan Kuskuren | miliyan 1.5 | miliyan 2 | miliyan 1.5 |
| Dam ɗin Mashin ɗina na Solder | miliyan 3 | miliyan 3 | miliyan 3 |
| Tatsuniya | Fari, Baƙi, Ja, Rawaya | Fari, Baƙi, Ja, Rawaya | Fari, Baƙi, Ja, Rawaya |
| Faɗi/Tsawo Mai Ƙaramin Labari | 4/23m | 4/23m | 4/23m |
| Ƙananan Radius Mai Lanƙwasa (Allo Guda ɗaya) | / | Kauri na allo 3-6 x | Kauri na Allon Lankwasawa 3-7 x |
| Ƙananan Radius Mai Lanƙwasa (Allon Gefe Biyu) | / | Kauri na allo 6-10 x | Kauri na Allon Lankwasawa 6-11 x |
| Radius mai lanƙwasawa (Allon layi mai yawa) | / | Kauri na allo 10-15 x | Kauri na Allon Lankwasawa 10-16 x |
| Radius mai lanƙwasawa (Lanƙwasawa mai ƙarfi) | / | Kauri na allo 20-40 x | Kauri na allo 20-40 × |
| Faɗin Fillet ɗin Tsari | / | 1.5+0.5mm | 1.5+0.5mm |
| Baka & Juya | 0.005 | / | 0.0005 |
| Juriyar Impedance | Ƙare Guda Ɗaya: ±5Ω(≤50Ω)，±7%(＞50Ω) | Ƙare Guda Ɗaya: ±5Ω(≤50Ω), ±10%(＞50Ω) | Ƙare Guda Ɗaya: ±5Ω(≤50Ω), ±10%(＞50Ω) |
| Juriyar Impedance | Bambanci: ±5Ω(≤50Ω)，±7%(＞50Ω) | Bambanci: ±5Ω(≤50Ω), ±10%(＞50Ω) | Bambanci: ±5Ω(≤50Ω), ±10%(＞50Ω) |
| Abin Rufe Mashin Solder | Kore, Baƙi, Shuɗi, Ja, Koren Matt, Rawaya, Fari, Shuɗi | Abin Rufe Kore/Baƙi PI/Rawaya PI | Kore, Baƙi, Shuɗi, Ja, Kore mai Laushi |
| Ƙarshen Fuskar | Faranti na zinariya na Eiectronic, ENIG, Faranti na zinariya mai tauri, Yatsa na Zinare, Azurfa Mai Nutsewa, Tin Mai Nutsewa, HASL LF, OSP, ENEPIG, Faranti mai laushi na zinariya | Faranti na zinariya na lantarki, ENIG, Faranti na zinariya mai tauri, Yatsa na Zinare, Azurfa Mai Nutsewa, Tin Mai Nutsewa, OSP, ENEPIG, Faranti mai laushi na zinariya | Faranti na zinariya na lantarki, ENIG, Faranti na zinariya mai tauri, Yatsa na Zinare, Azurfa Mai Nutsewa, Tin Mai Nutsewa, HASL LF, OSP, ENEPIG, Faranti mai laushi na zinariya |
| Tsarin Musamman | An binne shi/makanta ta hanyar, ramin mataki, girmansa, juriya/ƙarfi da aka binne, matsi mai gauraye, RF, yatsan zinariya, tsarin N+N, jan ƙarfe mai kauri, haƙowa ta baya, HDI (5+2N+5) | yatsan zinariya, lamination, manne mai sarrafawa, fim ɗin kariya, dome na ƙarfe | An binne shi/makanta ta hanyar, ramin mataki, girmansa mai girma, juriya/ƙarfi da aka binne, matsi mai gauraye, RF, yatsan zinariya, tsarin N+N, jan ƙarfe mai kauri, haƙowa ta baya |
|  |  |  |
