| Oġġett | PCB riġidu (HDI) | PCB flessibbli | PCB Riġidu-Flessibbli |
| Saff Massimu | 2-68L | 12-il litru | 68L |
| Saff ta' Ġewwa Min Traċċa/Spazju | 1.4/1.4mil | 2/2mil | 2/2mil |
| Traċċa/Spazju Minimu tas-Saff ta' Barra | 1.4/1.4mil | 3/3mil | 3/3mil |
| Saff ta' Ġewwa Max Ram | 6oz | 2oz | 6oz |
| Saff ta' Barra tar-Ram Max | 6oz | 3oz | 6oz |
| Tħaffir Mekkaniku Min | 0.15mm/6mil | 0.15mm | 0.15mm |
| Tħaffir bil-Laser Min | 0.05mm/3mil | 0.05mm | 0.05mm |
| Proporzjon Massimu tal-Aspett (Tħaffir Mekkaniku) | 20:1 | / | 20:1 |
| Proporzjon Massimu tal-Aspett (Tħaffir bil-Laser) | 1:1 | 1:1 | 1:1 |
| Allinjament bejn is-saffi | +/-0.254mm (1mil) | ±0.05mm | ±0.05mm |
| Tolleranza għall-PTH | ±0.075mm | ±0.075mm | ±0.075mm |
| Tolleranza NPTH | ±0.05mm | ±0.05mm | ±0.05mm |
| Tolleranza tal-Countersink | +0.15mm | ±0.15mm | ±0.15mm |
| Ħxuna tal-Bord | 0.20-12mm | 0.1-0.5mm | 0.4-3mm |
| Tolleranza tal-Ħxuna tal-Bord (＜1.Omm) | ±0.1mm | ±0.05mm | ±0.1mm |
| Tolleranza tal-Ħxuna tal-Bord (≥1.Omm) | ±8% | / | ±10% |
| Daqs Minimu tal-Bord | 10 * 10mm | 5 * 5mm | 10 * 10mm |
| Daqs Massimu tal-Bord | 1200mm * 750mm | 500 * 1200mm | 500 * 500mm |
| Allinjament tal-Kontorn | +/-0.075mm (3mil) | ±0.05mm | ±0.1mm |
| Il-BGA tiegħi | 0.125mm (5mil) | 7 miljun | 7 miljun |
| L-SMT tiegħi | 0.177 * 0.254mm (7 * 10mil) | 7 * 10mil | 7 * 10mil |
| Tneħħija Minima tal-Maskra tas-Saldatura | 1.5mil | 2mil | 1.5mil |
| Id-diga tal-Maskra tas-Saldatura Tiegħi | 3mil | 3mil | 3mil |
| Leġġenda | Abjad, Iswed, Aħmar, Isfar | Abjad, Iswed, Aħmar, Isfar | Abjad, Iswed, Aħmar, Isfar |
| Wisa'/Għoli tal-Leġġenda Minima | 4/23mil | 4/23mil | 4/23mil |
| Raġġ minimu tal-liwi (Bord Uniku) | / | 3-6 x Ħxuna tal-Bord | 3-7 x Ħxuna tal-Bord Flessibbli |
| Raġġ minimu tal-liwi (Bord b'żewġ naħat) | / | 6-10 x Ħxuna tal-Bord | 6-11 x Ħxuna tal-Bord Flessibbli |
| Raġġ minimu tal-liwi (Bord b'ħafna saffi) | / | 10-15 x Ħxuna tal-Bord | 10-16 x Ħxuna tal-Bord Flessibbli |
| Raġġ minimu tal-liwi (liwi dinamiku) | / | 20-40 x Ħxuna tal-Bord | 20-40 × Ħxuna tal-Bord |
| Wisa' tal-Flett tat-Tgħawwiġ | / | 1.5+0.5mm | 1.5+0.5mm |
| Pruwa u Dawra | 0.005 | / | 0.0005 |
| Tolleranza tal-Impedenza | Tarf Uniku: ±5Ω(≤50Ω),±7%(>50Ω) | Tarf Uniku: ±5Ω(≤50Ω),±10%(>50Ω) | Tarf Uniku: ±5Ω(≤50Ω), ±10%(>50Ω) |
| Tolleranza tal-Impedenza | Differenzjali: ±5Ω(≤50Ω),±7%(>50Ω) | Differenzjali: ±5Ω(≤50Ω),±10%(>50Ω) | Differenzjali: ±5Ω(≤50Ω), ±10%(>50Ω) |
| Maskra tal-Istann | Aħdar, Iswed, Blu, Aħmar, Aħdar Matt, Isfar, Abjad, Vjola | Maskra tas-Saldatura Ħadra/PI Iswed/PI Isfar | Aħdar, Iswed, Blu, Aħmar, Aħdar Matt |
| Irfinar tal-wiċċ | Kisi tad-deheb elettroniku, ENIG, Kisi tad-deheb iebes, Saba tad-Deheb, Fidda bl-Immersjoni, Landa bl-Immersjoni, HASL LF, OSP, ENEPIG, Kisi tad-deheb artab | Kisi tad-deheb elettroniku, ENIG, Kisi tad-deheb iebes, Saba tad-Deheb, Fidda bl-Immersjoni, Landa bl-Immersjoni, OSP, ENEPIG, Kisi tad-deheb artab | Kisi tad-deheb elettroniku, ENIG, Kisi tad-deheb iebes, Saba tad-Deheb, Fidda bl-Immersjoni, Landa bl-Immersjoni, HASL LF, OSP, ENEPIG, Kisi tad-deheb artab |
| Proċess Speċjali | Via midfuna/għomja, kanal pass pass, daqs żejjed, reżistenza/kapaċità midfuna, pressjoni mħallta, RF, saba' tad-deheb, struttura N+N, ram oħxon, tħaffir minn wara, HDI(5+2N+5) | saba' tad-deheb, laminazzjoni, kolla konduttiva, film protettiv, koppla tal-metall | Via midfuna/għomja, kanal pass pass, daqs żejjed, reżistenza/kapaċità midfuna, pressjoni mħallta, RF, saba' tad-deheb, struttura N+N, ram oħxon, tħaffir minn wara |
|  |  |  |
