| Eitem | PCB Anhyblyg (HDI) | PCB Hyblyg | PCB Anhyblyg-Hyblyg |
| Haen Uchaf | 2-68L | 12L | 68L |
| Olrhain/Bylchau Min Haen Fewnol | 1.4/1.4mil | 2/2 mil | 2/2 mil |
| Olrhain/Bylchau Min Haen Allanol | 1.4/1.4mil | 3/3 mil | 3/3 mil |
| Haen Fewnol Max Copr | 6 owns | 2 owns | 6 owns |
| Haen Allanol Max Copr | 6 owns | 3 owns | 6 owns |
| Drilio Mecanyddol Min | 0.15mm/6mil | 0.15mm | 0.15mm |
| Drilio Laser Min | 0.05mm/3mil | 0.05mm | 0.05mm |
| Cymhareb Agwedd Uchaf (Drilio Mecanyddol) | 20：1 | / | 20：1 |
| Cymhareb Agwedd Uchaf (Drilio Laser) | 1:1 | 1:1 | 1:1 |
| Aliniad Rhynghaen | +/-0.254mm (1mil) | ±0.05mm | ±0.05mm |
| Goddefgarwch PTH | ±0.075mm | ±0.075mm | ±0.075mm |
| Goddefgarwch NPTH | ±0.05mm | ±0.05mm | ±0.05mm |
| Goddefgarwch Gwrth-sudd | +0.15mm | ±0.15mm | ±0.15mm |
| Trwch y Bwrdd | 0.20-12mm | 0.1-0.5mm | 0.4-3mm |
| Goddefgarwch Trwch y Bwrdd ( |
±0.1mm | ±0.05mm | ±0.1mm |
| Goddefgarwch Trwch y Bwrdd (≥1.Omm) | ±8% | / | ±10% |
| Maint y Bwrdd Min | 10*10mm | 5*5mm | 10*10mm |
| Maint Uchaf y Bwrdd | 1200mm * 750mm | 500 * 1200mm | 500*500mm |
| Aliniad Amlinellol | +/-0.075mm (3mil) | ±0.05mm | ±0.1mm |
| Fy BGA | 0.125mm (5mil) | 7mil | 7mil |
| Fy UDRh | 0.177 * 0.254mm (7 * 10mil) | 7*10mil | 7*10mil |
| Clirio Masg Sodr Min | 1.5mil | 2 fil | 1.5mil |
| Fy Argae Mwgwd Sodr | 3mil | 3mil | 3mil |
| Chwedl | Gwyn, Du, Coch, Melyn | Gwyn, Du, Coch, Melyn | Gwyn, Du, Coch, Melyn |
| Lled/Uchder yr Allwedd Isafswm | 4/23mil | 4/23mil | 4/23mil |
| Radiws Plygu Min (Bwrdd Sengl) | / | 3-6 x Trwch y Bwrdd | 3-7 x Trwch y Bwrdd Hyblyg |
| Radiws Plygu Min (Bwrdd Ochr Dwbl) | / | 6-10 x Trwch y Bwrdd | 6-11 x Trwch Bwrdd Hyblyg |
| Radiws Plygu Min (Bwrdd Amlhaenog) | / | 10-15 x Trwch y Bwrdd | 10-16 x Trwch Bwrdd Hyblyg |
| Radiws Plygu Min (Plygu Dynamig) | / | 20-40 x Trwch y Bwrdd | 20-40 × Trwch y Bwrdd |
| Lled Ffiled Straen | / | 1.5+0.5mm | 1.5+0.5mm |
| Bwa a Throelli | 0.005 | / | 0.0005 |
| Goddefgarwch Rhwystriant | Un Pen: ±5Ω (≤50Ω), ±7% (＞50Ω) | Un Pen: ±5Ω (≤50Ω), ±10% (＞50Ω) | Un Pen: ±5Ω (≤50Ω), ±10% (＞50Ω) |
| Goddefgarwch Rhwystriant | Gwahaniaethol: ±5Ω (≤50Ω), ±7% (＞50Ω) | Gwahaniaethol: ±5Ω (≤50Ω), ±10% (＞50Ω) | Gwahaniaethol: ±5Ω (≤50Ω), ±10% (＞50Ω) |
| Masg Sodr | Gwyrdd, Du, Glas, Coch, Gwyrdd Matt, Melyn, Gwyn, Porffor | Masg Sodr Gwyrdd/PI Du/PI Melyn | Gwyrdd, Du, Glas, Coch, Gwyrdd Matt |
| Gorffeniad Arwyneb | Platio aur electronig, ENIG, Platio aur caled, Bysedd Aur, Arian Trochi, Tun Trochi, HASL LF, OSP, ENEPIG, Platio aur meddal | Platio aur electronig, ENIG, Platio aur caled, Bysedd Aur, Arian Trochi, Tun Trochi, OSP, ENEPIG, Platio aur meddal | Platio aur electronig, ENIG, Platio aur caled, Bysedd Aur, Arian Trochi, Tun Trochi, HASL LF, OSP, ENEPIG, Platio aur meddal |
| Proses Arbennig | Trwy gladdu/dall, rhigol gam, gor-fawr, gwrthiant/capasiti claddu, pwysau cymysg, RF, bys aur, strwythur N+N, copr trwchus, drilio cefn, HDI (5+2N+5) | bys aur, lamineiddio, glud dargludol, ffilm cysgodi, cromen fetel | Trwy gladdu/dall, rhigol gam, gor-fawr, gwrthiant/capasiti claddu, pwysau cymysg, RF, bys aur, strwythur N+N, copr trwchus, drilio cefn |
|  |  |  |
