Ogbe siri ike-Flex
Teknụzụ Kachasị Elu nke Ọma na Ngwọta Kachasị Mma.
Uru nke Rigid-Flex Board
Taa, imewe na-achọ obere mmepụta, ọnụ ala dị ala na ọsọ dị elu nke ngwaahịa, ọkachasị n'ahịa ngwaọrụ mkpanaka, nke na-agụnyekarị sekit eletrọniki dị elu. Iji Rigid-Flex Boards ga-abụ nhọrọ magburu onwe ya maka ngwaọrụ ndị dị n'akụkụ ejikọtara site na IO. Uru asaa dị mkpa nke ihe achọrọ maka imewe nke ijikọta ihe osisi na-agbanwe agbanwe na ihe osisi siri ike na usoro mmepụta, ijikọta ihe abụọ dị n'okpuru na prepreg, wee nweta njikọ eletriki dị n'etiti nke ndị na-eduzi site na oghere ma ọ bụ vias kpuru ìsì/eli bụ dị ka ndị a:
Mgbakọ 3D iji belata sekit
Ntụkwasị obi njikọ ka mma
Belata ọnụọgụ nke ihe mejupụtara na akụkụ
Nkwụsi ike nke impedance ka mma
Nwere ike imepụta nhazi stacking dị mgbagwoju anya nke ukwuu
Mejuputa nhazi ọdịdị ka mma
Belata nha
Right-flex bụ bọọdụ nke na-ejikọta ike na mgbanwe, na-ahazi ma ike nke bọọdụ siri ike na mgbanwe nke bọọdụ na-agbanwe agbanwe.
Ọkara FPC
Ụzọ Nhazi Ike
| ihe | Flex - Rigid | Regal | Ọkara-Flex |
| Foto |  |  |  |
| Ihe Na-agbanwe Agbanwe | Polyimide | FR4 + Mkpuchi (Polyimide) | FR4 |
| Ọkpụrụkpụ na-agbanwe agbanwe | 0.025~0.1mm (Ewepụghị ọla kọpa) | 0.05~0.1mm (Ewepụghị ọla kọpa) | Ọkpụrụkpụ Kachasị: 0.25+/‐0.05mm (Ihe E Ji Mara: EM825(I)) |
| Nkuku ịgbagọ | Oke kachasị 180° | Oke kachasị 180° | Oke 180° (Flex oyi akwa ≤2) Oke 90° (Flex oyi akwa> 2) |
| Ntachi obi nke na-agbanwe agbanwe; IPC‐TM‐650, Usoro 2.4.3. | NKE AHỤ | ||
| Nnwale Ịgbagọ; 1) Dayameta Mandrel: 6.25mm | |||
| Ngwa | Flex iji wụnye & Dynamic (N'akụkụ otu) | Flex iji wụnye | Flex iji wụnye |
| Mmecha Elu | Uru nkịtị | Onye na-ebunye ngwaahịa | |
| Ngalaba Ọkụ Ndị Afọ Ofufo |  | 0.2~0.6um;0.2~0.35um | Enthone Shikoku kemịkal |
| KWEKWERE |  | Ma ọ bụ: 0.03~0.12um, dị: 2.5~5um | ATO teknụzụ/Chuang Zhi |
| ENIG nhọrọ |  | Ma ọ bụ: 0.03~0.12um, dị: 2.5~5um | ATO teknụzụ/Chuang Zhi |
| ENEPIC |  | Ọnwa: 0.05~0.125um, Pd: 0.05~0.125um, Ni:5~10um | Chuang Zhi |
| Ọlaedo siri ike |  | Au:0.2~1.5um, Ni: nkeji 2.5um | Onye na-akwụ ụgwọ |
| Ọlaedo Dị Nro |  | Au:0.15~0.5um, Ni:min 2.5um | Azụ̀ |
| Tin Mmiri |  | Nke kacha nta: 1um | Enthone / ATO tech |
| Ọlaọcha Imikpu |  | 0.15~0.45um | Macdermid |
| HASL na HASL (OS) na-enweghị ndu |  | 1 ~ 25um | Nihon Superior |
Ụdị Au/Ni
● Enwere ike kewaa ihe mkpuchi ọlaedo n'ime ọlaedo dị gịrịgịrị na ọlaedo dị arọ dịka ọkpụrụkpụ ya si dị. N'ozuzu, a na-akpọ ọlaedo dị n'okpuru 4u”(0.41um) ọlaedo dị gịrịgịrị, ebe a na-akpọ ọlaedo dị n'elu 4u” ọlaedo dị arọ. ENIG nwere ike ime naanị ọlaedo dị gịrịgịrị, ọ bụghị ọlaedo dị arọ. Naanị ihe mkpuchi ọlaedo nwere ike ime ma ọlaedo dị gịrịgịrị ma dị arọ. Oke ọkpụrụkpụ ọlaedo dị n'elu osisi na-agbanwe agbanwe nwere ike ịbụ ihe karịrị 40u”. A na-ejikarị ọlaedo dị arọ eme ihe n'ebe ọrụ yana ihe achọrọ maka njikọ ma ọ bụ iyi.
● Enwere ike kewaa ihe mkpuchi ọlaedo n'ụdị ọlaedo dị nro na ọlaedo siri ike. Ọlaedo dị nro bụ ọlaedo nkịtị dị ọcha, ebe ọlaedo siri ike bụ kobalt nwere ọlaedo. Ọ bụ kpọmkwem n'ihi na etinyere kobalt na ike nke oyi akwa ọlaedo na-abawanye nke ukwuu karịa 150HV iji mezuo ihe achọrọ maka iguzogide iyi.
| Ụdị Ihe | Njirimara | Onye na-ebunye ngwaahịa | |
| Ihe siri ike | Mfu nkịtị | DK>4.2, DF>0.02 | NanYa / EMC / TUC / ITEQ / ShengYi / Isola / Doosan wdg. |
| Mfu etiti | DK>4.1, DF:0.015~0.02 | NanYa / EMC / TUC / ITEQ wdg. | |
| Mfu dị ala | DK:3.8~4.1, DF:0.008~0.015 | EMC / NanYa / TUC / Isola / Panasonic wdg. | |
| Mfu Dị Oke Ala | DK:3.0~3.8, DF:0.004~0.008 | EMC / Panasonic / Rogers / TUC / Isola / ITEQ / NanYa wdg. | |
| Mfu Dị Ala nke Ukwuu | DK | Rogers / TUC / ITEQ / Panasonic / Isola wdg. | |
| BT | Agba: Ọcha / Ojii | MGC / Hitachi / NanYa / ShengYi wdg. | |
| Foil ọla kọpa | Ọkọlọtọ | Ike siri ike (RZ) = 6.34um | NanYa, KB, LCY |
| RTF | Ike siri ike (RZ) = 3.08um | NanYa, KB, LCY | |
| VLP | Ike siri ike (RZ) = 2.11um | MITSUI, Foil sekit | |
| HVLP | Ike siri ike (RZ) = 1.74um | MITSUI, Foil sekit | |
| Ụdị Ihe | DK/DF nkịtị | DK/DF dị ala | |||
| Njirimara | Onye na-ebunye ngwaahịa | Njirimara | Onye na-ebunye ngwaahịa | ||
| Ihe Mgbakwụnye | FCCL (nwere ED na RA) | Nkịtị Polyimide DK:3.0~3.3 DF:0.006~0.009 | Thinflex / Panasonic / Taiflex | Polyimide agbanweela DK:2.8~3.0 DF:0.003~0.007 | Thinflex / Taiflex |
| Mkpuchi (Ojii/Odo odo) | Nkịtị ihe nrapado DK:3.3~3.6 Df:0.01~0.018 | Taiflex / Dupont | Ihe mgbakwunye agbanwere agbanwe DK:2.8~3.0 DF:0.003~0.006 | Taiflex / Arisawa | |
| Ihe mkpuchi (Ọkpụrụkpụ: 15/25/40 um) | Epoxy nkịtị DK:3.6~4.0 DF:0.06 | Taiflex / Dupont | Epoxy DK emezigharịrị:2.4~2.8 DF:0.003~0.005 | Taiflex / Arisawa | |
| Ink S/M | Ihe mkpuchi mkpuchi; Agba: Akwụkwọ ndụ akwụkwọ ndụ / acha anụnụ anụnụ / Oji / Ọcha / Odo / Uhie | Epoxy nkịtị DK:4.1 DF:0.031 | Taiyo / OTC / AMC | Epoxy DK emezigharịrị:3.2 DF:0.014 | Taiyo |
| Ink akụkọ ifo | Agba ihuenyo: Ojii / Ọcha / Odo odo Agba inkjet: Ọcha | AMC | |||
| Ihe Ndị Ọzọ | IMS | Ihe ndị e ji ígwè kpuchie (nwere Al ma ọ bụ Cu) | EMC / Ventec | ||
| Igwe Ọkụ Dị Elu | 1.0 / 1.6 / 2.2 (W/M*K) | ShengYi / Ventec | |||
| M | Mpempe akwụkwọ ọlaọcha (SF-PC6000-U1 / SF-PC8600-C) | Tatsuta | |||
Ihe dị elu na ọsọ dị elu (Na-agbanwe agbanwe)
| DK | Df | Ụdị Ihe | |
| FCCL (Polyimide) | 3.0~3.3 | 0.006~0.009 | Usoro Panasonic R‐775; Usoro Thinflex A; Usoro Thinflex W; Usoro Taiflex 2up |
| FCCL (Polyimide) | 2.8~3.0 | 0.003~0.007 | Usoro Thinflex LK; usoro Taiflex 2FPK |
| FCCL (LCP) | 2.8~3.0 | 0.002 | Usoro Thinflex LC; usoro Panasonic R-705T se; usoro Taiflex 2CPK |
| Ihe mkpuchi | 3.3~3.6 | 0.01~0.018 | Usoro Dupont FR; Usoro Taiflex FGA; Usoro Taiflex FHB; Usoro Taiflex FHK |
| Ihe mkpuchi | 2.8~3.0 | 0.003~0.006 | Usoro Arisawa C23; usoro Taiflex FXU |
| Mpempe akwụkwọ njikọta | 3.6~4.0 | 0.06 | Usoro Taiflex BT; usoro Dupont FR |
| Mpempe akwụkwọ njikọta | 2.4~2.8 | 0.003~0.005 | Usoro Arisawa A23F; Usoro Taiflex BHF |
Teknụzụ Ịkụ Azụ
● E kwesịghị inwe ihe nrịbama Microstrip, a ga-enyocha ha site n'akụkụ ihe nrịbama ahụ.
● A ga-enyocha akara dị n'akụkụ nke abụọ site n'akụkụ nke abụọ (Akụkụ mmalite kwesịrị ịdị n'akụkụ ahụ).
● Nhazi dị mma bụ na a ga-enyocha akara stripline site n'akụkụ ọ bụla nke na-ebelata stub via.
● A ga-enweta nsonaazụ kacha mma maka stripline site na iji ụzọ mkpirisi nke e tinyere n'azụ.
Ngwa Ngwaahịa: Ihe mmetụta radar ụgbọala
Nkọwa Ngwaahịa:
PCB oyi akwa 4 nwere ihe eji emekọ ihe (Hydrocarbon + FR4 ọkọlọtọ)
Mkpọkọ: 4L HDI / Enweghị nha nhata
Ihe ịma aka:
Ihe dị elu na-eji Lamination FR4 Standard
Ọkụ omimi a na-achịkwa
Ngwa Ngwaahịa: Ihe mmetụta radar ụgbọala
Nkọwa Ngwaahịa:
PCB oyi akwa 4 nwere ihe eji emekọ ihe (Hydrocarbon + FR4 ọkọlọtọ)
Mkpọkọ: 4L HDI / Enweghị nha nhata
Ihe ịma aka:
Ihe dị elu na-eji Lamination FR4 Standard
Ọkụ omimi a na-achịkwa
Ngwa Ngwaahịa:
Ọdụ ọdụ isi
Nkọwa Ngwaahịa:
Ntụpọ iri atọ (ihe e ji mee otu ihe)
Nchịkọta: Ọnụọgụ oyi akwa dị elu / Symmetric
Ihe ịma aka:
Ndebanye aha maka akwa ọ bụla
Oke akụkụ dị elu nke PTH
Oke paramita lamination dị oke mkpa
Ngwa Ngwaahịa:
Ebe nchekwa
Nkọwa Ngwaahịa:
Nchịkọta: 16 oyi akwa Anylayer
Ule IST: Ọnọdụ: 25‐190℃ Oge: nkeji 3, 190‐25℃ Oge: nkeji 2, okirikiri 1500. Ọnụego mgbanwe nguzogide ≤10%, Usoro ule: IPC‐TM650‐2.6.26. Nsonaazụ: Gafee.
Ihe ịma aka:
Ịcha ihe karịrị ugboro isii
Izi ezi nke laser vias
Ngwa Ngwaahịa:
Ebe nchekwa
Nkọwa Ngwaahịa:
Nchịkọta: Oghere
Ihe: Ọkọlọtọ FR4
Ihe ịma aka:
Iji teknụzụ De-cap na PCB Rigid
Ndebanye aha n'etiti akwa
Mbelata dị obere na mpaghara nzọụkwụ
Usoro dị oke mkpa maka G/F
Ngwa Ngwaahịa:
Modulu igwefoto / Akwụkwọ ndetu
Nkọwa Ngwaahịa:
Nchịkọta: Oghere
Ihe: Ọkọlọtọ FR4
Ihe ịma aka:
Iji teknụzụ De-cap na PCB Rigid
Mmemme laser dị mkpa na paramita na usoro De-cap
Ngwa Ngwaahịa:
Ọkụ ụgbọala
Nkọwa Ngwaahịa:
Nchịkọta: IMS / Heatsink
Ihe: Ígwè + Gluu/Prepreg + PCB
Ihe ịma aka:
Ntọala aluminom na ntọala ọla kọpa (otu oyi akwa)
Ọkwa okpomọkụ
FR4+ Gluu/Prepreg + Al lamination
Uru:
Nnukwu Mbufe Okpomọkụ
Nkọwa Ngwaahịa:
Ihe dị elu (N'otu aka)
Nchịkọta: Mkpụrụ ego ọla kọpa agbakwunyere / Symmetric
Ihe ịma aka:
Izi ezi nke akụkụ mkpụrụ ego
Izi ezi nke oghere lamination
Mmiri resin dị oke mkpa
Ngwa Ngwaahịa:
Ọdụ ụgbọ ala / ụlọ ọrụ mmepụta ihe / ọdụ isi
Nkọwa Ngwaahịa:
Ntọala oyi akwa dị n'ime bụ ọla kọpa 6OZ
Ntọala oyi akwa dị n'èzí nke ọla kọpa 3OZ/6OZ. Ngụkọta elu:
Ibu ọla kọpa 6OZ n'ime oyi akwa dị n'ime
Ihe ịma aka:
Oghere ọla kọpa 6OZ juputara na epoxy zuru oke
Enweghị ntụpọ na nhazi lamination
Ngwa Ngwaahịa:
Ekwentị ama / Kaadị SD / SSD
Nkọwa Ngwaahịa:
Nchịkọta: HDI / Anylayer
Ihe: Ọkọlọtọ FR4
Ihe ịma aka:
Ọ dị oke obere profaịlụ/RTF Cu foil
Ịhazi nha nhata
Ihe nkiri akọrọ dị elu nke nwere mkpebi siri ike
Mkpughe LDI (Foto Laser Kpọmkwem)
Ngwa Ngwaahịa:
Nkwurịta okwu / Kaadị SD / Modulu Optical
Nkọwa Ngwaahịa:
Nchịkọta: HDI / Anylayer
Ihe: Ọkọlọtọ FR4
Ihe ịma aka:
Ọ dịghị oghere na nsọtụ mkpịsị aka mgbe PCB nọ na nhazi ọla edo
Ihe nkiri pụrụ iche na-eguzogide ọgwụ
Ngwa Ngwaahịa:
Ụlọ ọrụ mmepụta ihe
Nkọwa Ngwaahịa:
Njikọta: Rigid-Flex
Na mgbanwe Eccobond na mgbanwe Rigid-Flex
Ihe ịma aka:
Ọsọ na omimi dị mkpa maka ogwe osisi
Paramita nrụgide ikuku dị oke mkpa