Papa Ma'a'a-Flex
Tekonolosi Fa'atekonolosi Sili Atu Ona Lelei & Fofo Atoatoa.
Fa'amanuiaga o le Rigid-Flex Board
I aso nei, o loʻo faʻateleina le tuliloaina e le mamanu o le faʻaitiitiga, taugofie ma le saoasaoa tele o oloa, aemaise lava i le maketi o masini feaveaʻi, lea e masani ona aofia ai matagaluega eletise maualuga. O le faʻaaogaina o laupapa Rigid-Flex o se filifiliga sili lea mo masini faʻapipiʻi e fesoʻotaʻi e ala i le IO. E fitu faʻamanuiaga tetele e aumaia e manaʻoga o le mamanu o le tuʻufaʻatasia o mea laupapa fetuutuunai ma mea laupapa malosi i le faiga o gaosiga, tuʻufaʻatasia o mea e lua o le substrate ma le prepreg, ona ausia lea o le fesoʻotaʻiga eletise i le va o vaega o uaea e ala i pu poʻo vias tauaso/tanu e pei ona taua i lalo:
Fa'apotopotoga 3D e fa'aitiitia ai matagaluega
Fa'atuatuaina lelei o feso'ota'iga
Fa'aitiitia le aofa'i o vaega ma vaega
Lelei le tumau o le impedance
E mafai ona mamanuina se fausaga fa'aputuga e matua faigata lava
Fa'atino se mamanu foliga e sili atu ona faigofie
Fa'aitiitia le tele
O le rigid-flex o se laupapa e tuʻufaʻatasia ai le malō ma le fetuʻunaʻi, e faʻatinoina uma ai le malō o le laupapa malō ma le fetuʻunaʻi o le laupapa fetuʻunaʻi.
Semi FPC
Fuafuaga o le Agavaa
| Mea | Feoloolo - Ma'a'a | Malo tele | Semi-Flex |
| Ata |  |  |  |
| Meafaitino Fetuutuunai | Polimida | FR4 + Ufiufi (Polyimide) | FR4 |
| Mafiafia fetuutuunai | 0.025~0.1mm (E le aofia ai le kopa) | 0.05~0.1mm (E le aofia ai le kopa) | Mafiafia o lo'o totoe: 0.25+/‐0.05mm (Mea Fa'apitoa: EM825(I)) |
| Tulimanu punou | Maualuga 180° | Maualuga 180° | Maualuga 180° (Flex layer ≤2) Maualuga 90° (Flex layer>2) |
| Tumau i le Fetu'una'i; IPC‐TM‐650, Metotia 2.4.3. | LENA | ||
| Su'ega Pi'o; 1) Lapo'a o le Mandrel: 6.25mm | |||
| Talosaga | Fa'afeso'ota'i e fa'apipi'i & Fa'agaoioia (Itu e tasi) | Fa'alelei e fa'apipi'i ai | Fa'alelei e fa'apipi'i ai |
| Fa'auma o le Laupapa | Tau Masani | Kamupani Fa'atau | |
| Matagaluega o le Aufaigaluega a ... |  | 0.2~0.6um;0.2~0.35um | Kemikolo Enthone Shikoku |
| MALIE |  | Pe:0.03~0.12um, Is:2.5~5um | ATO tekinolosi/Chuang Zhi |
| ENIG Filifilia |  | Pe:0.03~0.12um, Is:2.5~5um | ATO tekinolosi/Chuang Zhi |
| ENEPIC |  | Au: 0.05~0.125um, Pd: 0.05~0.125um,Ni: 5~10um | Chuang Zhi |
| Auro Malō |  | Au:0.2~1.5um, Ni: itiiti ifo i le 2.5um | Tagata totogi |
| Auro Mālū |  | Au:0.15~0.5um, Ni:min 2.5um | I'A |
| Apa Fa'atofu |  | Min: 1um | Tekonolosi a Enthone / ATO |
| Siliva Fa'atofuina |  | 0.15~0.45um | Macdermid |
| HASL & HASL e leai se apamemea (OS) |  | 1~25um | Nihon Superior |
Ituaiga Au/Ni
● E mafai ona vaevaeina le ufiufi auro i auro manifinifi ma auro mafiafia e tusa ai ma le mafiafia. I se tulaga lautele, o auro e i lalo ifo o le 4u” (0.41um) e ta'ua o auro manifinifi, ae o auro e sili atu i le 4u” e ta'ua o auro mafiafia. E na'o auro manifinifi e mafai ona faia e le ENIG, ae le o auro mafiafia. E na'o le ufiufi auro e mafai ona faia ai auro manifinifi ma auro mafiafia. O le mafiafia aupito maualuga o le auro mafiafia i luga o laupapa fetuutuunai e mafai ona sili atu i le 40u”. O le auro mafiafia e fa'aaogaina tele i siosiomaga faigaluega e mana'omia ai le tete'e i le pipii po'o le ofuina.
● E mafai ona vaevaeina le ufi auro i auro vaivai ma auro malo e tusa ai ma le ituaiga. O auro vaivai o le auro mama masani, ae o auro malo o le auro o loʻo i ai le cobalt. O le mea tonu lava lea e faʻaopoopo i ai le cobalt, o le maʻaʻa o le vaega auro e matua faʻateleina lava i le sili atu i le 150HV e faʻafetaui ai manaʻoga o le teteʻe atu i le ofuina.
| Ituaiga Meafaitino | Meatotino | Kamupani Fa'atau | |
| Mea Malō | Pa'ū Masani | DK>4.2, DF>0.02 | NanYa / EMC / TUC / ITEQ / ShengYi / Isola / Doosan ma isi. |
| Leiloa Tutotonu | DK>4.1, DF:0.015~0.02 | NanYa / EMC / TUC / ITEQ ma isi. | |
| Leiloa Maualalo | DK:3.8~4.1, DF:0.008~0.015 | EMC / NanYa / TUC / Isola / Panasonic ma isi. | |
| Leiloa Maualalo Tele | DK:3.0~3.8, DF:0.004~0.008 | EMC / Panasonic / Rogers / TUC / Isola / ITEQ / NanYa ma isi. | |
| Pa'ū Maualalo Tele | DK | Rogers / TUC / ITEQ / Panasonic / Isola ma isi. | |
| BT | Lanu：Pa'epa'e / Uliuli | MGC / Hitachi / NanYa / ShengYi ma isi. | |
| Pepa kopa | Tulaga Masani | Ma'a'a (RZ) = 6.34um | NanYa, KB, LCY |
| RTF | Ma'a'a (RZ) = 3.08um | NanYa, KB, LCY | |
| VLP | Ma'a'a (RZ) = 2.11um | MITSUI, Pepa Fa'aeletoronika | |
| HVLP | Ma'a'a (RZ) = 1.74um | MITSUI, Pepa Fa'aeletoronika | |
| Ituaiga Meafaitino | DK/DF masani | DK/DF maualalo | |||
| Meatotino | Kamupani Fa'atau | Meatotino | Kamupani Fa'atau | ||
| Mea Fa'alelei | FCCL (Fa'atasi ai ma le ED & RA) | Polyimide Masani DK:3.0~3.3 DF:0.006~0.009 | Thinflex / Panasonic / Taiflex | Polyimide ua Suia DK:2.8~3.0 DF:0.003~0.007 | Thinflex / Taiflex |
| Ufiufi (Uliuli/Sasamasama) | Pipii Masani DK:3.3~3.6 Df:0.01~0.018 | Taiflex / Dupont | Fa'apipi'i Fa'aleleia DK:2.8~3.0 DF:0.003~0.006 | Taiflex / Arisawa | |
| Ata tifaga fusi (Mafiafia: 15/25/40 um) | Epoxy Masani DK:3.6~4.0 DF:0.06 | Taiflex / Dupont | Epoxy Fa'afouina DK:2.4~2.8 DF:0.003~0.005 | Taiflex / Arisawa | |
| Vaitusi S/M | Ufimata solder; Lanu: Lanumeamata / Lanumoana / Uliuli / Paʻepaʻe / Samasama / Mumu | Epoxy Masani DK:4.1 DF:0.031 | Taiyo / OTC / AMC | Epoxy Fa'afouina DK:3.2 DF:0.014 | Taiyo |
| Vaitusi tala fa'asolopito | Lanu o le Laupapa: Uliuli / Paʻepaʻe / Samasama Lanu o le Inkjet: Paʻepaʻe | AMC | |||
| Isi Meafaitino | IMS | Mea Fa'apipi'i U'amea Fa'amama (fa'atasi ai ma le Al po'o le Cu) | EMC / Ventec | ||
| Fa'avevela Maualuga | 1.0 / 1.6 / 2.2 (W/M*K) | ShengYi / Ventec | |||
| Ou | Pepa siliva (SF‐PC6000‐U1 / SF‐PC8600‐C) | Tatsuta | |||
Meafaitino e Saosaoa Maualuga ma Fa'atele (Fesuia'i)
| DK | Df | Ituaiga Meafaitino | |
| FCCL (Polimide) | 3.0~3.3 | 0.006~0.009 | Panasonic R-775 fa'asologa; Thinflex A fa'asologa; Thinflex W fa'asologa; Taiflex 2up fa'asologa |
| FCCL (Polimide) | 2.8~3.0 | 0.003~0.007 | Fa'asologa o Thinflex LK; Fa'asologa o Taiflex 2FPK |
| FCCL (LCP) | 2.8~3.0 | 0.002 | Fa'asologa o le Thinflex LC; Panasonic R-705T se; Fa'asologa o le Taiflex 2CPK |
| Ufiufi | 3.3~3.6 | 0.01~0.018 | Fa'asologa o Dupont FR; Fa'asologa o Taiflex FGA; Fa'asologa o Taiflex FHB; Fa'asologa o Taiflex FHK |
| Ufiufi | 2.8~3.0 | 0.003~0.006 | Fa'asologa o Arisawa C23; Fa'asologa o Taiflex FXU |
| Pepa Fa'apipi'i | 3.6~4.0 | 0.06 | Fa'asologa o Taiflex BT; Fa'asologa o Dupont FR |
| Pepa Fa'apipi'i | 2.4~2.8 | 0.003~0.005 | Fa'asologa o Arisawa A23F; Fa'asologa o Taiflex BHF |
Tekonolosi o le vili i tua
● E le tatau ona i ai ni vias o fa'ailoga o le microstrip, e tatau ona su'eina mai le itu o le fa'ailoga.
● E tatau ona su'eina le fa'ailoga i le itu lona lua mai le itu lona lua (E tatau ona i ai le itu fa'alauiloa i lea itu).
● O le mamanu lelei o le tatau lea ona su'eina ni laina fa'asolosolo mai so'o se itu e sili ona fa'aitiitia ai le via stub.
● O taunuuga sili ona lelei mo le stripline o le a maua e ala i le faʻaaogaina o vias pupuu ua viliina i tua.
Fa'aaogāina o le Oloa: Sensor radar taavale
Fa'amatalaga o le oloa:
PCB 4 vaega ma mea fa'afefiloi (Haidrokarboni + FR4 Fa'amasani)
Fa'aputuga: 4L HDI / Asymmetric
Lu'i:
Mea fa'atelevave maualuga ma le Lamination Fa'a-Fa ...
Vili loloto pulea
Fa'aaogāina o le Oloa: Sensor radar taavale
Fa'amatalaga o le oloa:
PCB 4 vaega ma mea fa'afefiloi (Haidrokarboni + FR4 Fa'amasani)
Fa'aputuga: 4L HDI / Asymmetric
Lu'i:
Mea fa'atelevave maualuga ma le Lamination Fa'a-Fa ...
Vili loloto pulea
Fa'aaogāina o le Oloa:
Nofoaga autū
Fa'amatalaga o le oloa:
30 Vaega (Mea tutusa)
Faaputuga: Tele le aofa'i o vaega / Tutusa
Lu'i:
Resitalaina mo vaega taʻitasi
Fua fa'atatau maualuga o le PTH
Fa'ailoga taua o le lamination
Fa'aaogāina o le Oloa:
Manatua
Fa'amatalaga o le oloa:
Faaputu i luga: 16 Vaega Soo se Vaega
Su'ega IST: Tulaga: 25‐190℃ Taimi: 3 minute, 190‐25℃ Taimi: 2 minute, 1500 Ta'amilosaga. Saosaoa o le suiga o le tete'e ≤10%, Metotia o le Su'ega: IPC‐TM650‐2.6.26. I'uga: Pasi.
Lu'i:
Laminating e sili atu i le 6 taimi
Sa'o le sa'o o le vias laser
Fa'aaogāina o le Oloa:
Manatua
Fa'amatalaga o le oloa:
Faaputuga: Pu
Meafaitino: FR4 Masani
Lu'i:
Fa'aaogaina o le tekinolosi De‐cap i luga o le Rigid PCB
Resitalaina i le va o vaega
E itiiti ifo le oomi i le vaega o laasaga
Faiga fa'apitoa mo le beveling mo le G/F
Fa'aaogāina o le Oloa:
Vaega o le Mea Pueata / Api Tusi
Fa'amatalaga o le oloa:
Faaputuga: Pu
Meafaitino: FR4 Masani
Lu'i:
Fa'aaogaina o le tekinolosi De‐cap i luga o le Rigid PCB
Polokalama laser taua ma parakalafa i le faagasologa o le De-cap
Fa'aaogāina o le Oloa:
Moli ta'avale
Fa'amatalaga o le oloa:
Fa'aputuga: IMS / Heatsink
Meafaitino: Uamea + Kelu/Prepreg + PCB
Lu'i:
Fa'avae alumini ma fa'avae apamemea (vaega e tasi)
Fa'avevela o le eletise
FR4+ Kelu/Prepreg + Al lamination
Fa'amanuiaga:
Fa'asa'olotoina Tele o le Vevela
Fa'amatalaga o le oloa:
Mea saoasaoa maualuga (Homogeneous)
Faaputuga: Tupe apamemea ua fa'apipi'iina / Fa'atusatusa
Lu'i:
Sa'o le fua o le tupe siliva
Sa'o lelei o le tatalaina o le lamination
Tafega taua o le resin
Fa'aaogāina o le Oloa:
Ta'avale / Alamanuia / Nofoaga Autu
Fa'amatalaga o le oloa:
Vaega i totonu o le apamemea faavae 6OZ
Vaega pito i fafo apamemea faavae 3OZ/6OZ Faaputuga:
6OZ mamafa o le apamemea i le vaega i totonu
Lu'i:
6OZ avanoa apamemea ua fa'atumuina atoa i le epoxy
Leai se feeseesea'iga i le fa'agasologa o le lamination
Fa'aaogāina o le Oloa:
Telefonipoto / Kata SD / SSD
Fa'amatalaga o le oloa:
Fa'aputuga: HDI / Anylayer
Meafaitino: FR4 Masani
Lu'i:
Pepa alumini Cu maualalo tele/RTF
Fa'aputuga tutusa
Ata mago maualuga le iugafono
Fa'aalia o le LDI (Ata Tuusa'o a le Laser)
Fa'aaogāina o le Oloa:
Fesootaiga / Kata SD / Module Optical
Fa'amatalaga o le oloa:
Fa'aputuga: HDI / Anylayer
Meafaitino: FR4 Masani
Lu'i:
Leai se avanoa i le pito o le tamatamailima pe a fa'apipi'i le PCB i le fa'agasologa auro
Ata tifaga fa'apitoa e tete'e
Fa'aaogāina o le Oloa:
Alamanuia
Fa'amatalaga o le oloa:
Fa'aputuga: Rigid-Flex
Faatasi ai ma Eccobond i le suiga o le Rigid-Flex
Lu'i:
Saosaoa taua ma le loloto o le gaoioi mo le au
Parakalafa taua o le mamafa o le ea