Awoodda Golaha PCB
SMT, magaca oo buuxa waa tiknoolajiyada dusha sare ee lagu dhejiyo. SMT waa hab lagu dhejiyo qaybaha ama qaybaha looxyada. Natiijo wanaagsan iyo hufnaan sare awgeed, SMT waxay noqotay habka ugu muhiimsan ee loo isticmaalo habka isu-geynta PCB.
Faa'iidooyinka isku xirka SMT
1. Cabbir yar iyo miisaan fudud
Isticmaalka tiknoolajiyada SMT si toos ah loogu soo ururiyo qaybaha looxa ayaa gacan ka geysanaya yareynta cabbirka iyo miisaanka PCB-yada oo dhan. Habkan isku-dubaridka ah wuxuu noo ogolaanayaa inaan qaybo badan dhigno meel xaddidan, taasoo gaari karta naqshado isku dhafan iyo waxqabad wanaagsan.
2. Kalsooni sare
Ka dib marka la xaqiijiyo nooca tijaabada ah, habka oo dhan ee isu-imaatinka SMT wuxuu ku dhawaad otomaatig yahay iyadoo la adeegsanayo mashiinno sax ah, taasoo ka dhigaysa mid yareysa khaladaadka ay sababi karaan ku lug lahaanshaha gacanta. Thanks to automatic, tiknoolajiyada SMT waxay hubisaa isku halaynta iyo joogteynta PCB-yada.
3. Kharash badbaadin ah
Isku-dubaridka SMT badanaa wuxuu ku shaqeeyaa mashiinno otomaatig ah. In kasta oo qiimaha gelinta mashiinnada uu sarreeyo, mashiinnada otomaatiga ah waxay gacan ka geystaan yareynta tallaabooyinka gacanta lagu qaato inta lagu jiro hababka SMT, taas oo si weyn u hagaajinaysa hufnaanta wax soo saarka waxayna hoos u dhigaysaa kharashyada shaqada muddada dheer. Waxaana jira agab yar oo la isticmaalo marka loo eego isku-dubaridka godadka dhex mara, kharashkuna sidoo kale wuu yaraan doonaa.
| Awoodda SMT: 19,000,000 dhibcood/maalintii | |
| Qalabka Tijaabada | Qalabka X-RAY ee aan wax baabi'in, Qalabka Baaraha Qodobka Koowaad, A0I, Qalabka Baaraha ICT, Qalabka Dib-u-habaynta BGA |
| Xawaaraha Ku-rakibidda | 0.036 S/pcs (Xaaladda ugu Fiican) |
| Qaybaha Gaarka ah. | Xirmada ugu yar ee dhegdheg leh |
| Saxnaanta qalabka ugu yar | |
| Saxnaanta jajabka IC | |
| Qalabka PCB-ga ee la rakibay. | Cabbirka substrate-ka |
| Dhumucda substrate-ka | |
| Heerka Bilaabashada | 1. Saamiga Awoodda Impedance: 0.3% |
| 2. IC oo aan lahayn laad | |
| Nooca Guddiga | POP/Caadiga PCB/FPC/Rigid-Flex PCB/Bed PCB ku salaysan |
| Awoodda Maalinlaha ah ee DIP | |
| Khadka ku-xidhka DIP | 50,000 dhibcood/maalintii |
| Khadka alxanka boostada DIP | 20,000 dhibcood/maalintii |
| Khadka tijaabada DIP | 50,000pcs PCBA/maalintii |
| Awoodda Wax Soo Saarka ee Qalabka SMT ee ugu Muhiimsan | ||
| Mashiin | Kala duwanaanshaha | Halbeegga |
| Daabacaha GKG GLS | Daabacaadda PCB | 50x50mm ~ 610x510mm |
| saxnaanta daabacaadda | ±0.018mm | |
| Cabbirka jir | 420x520mm-737x737mm | |
| kala duwan oo dhumucdiisuna tahay PCB | 0.4-6mm | |
| Mashiinka isku dhafan ee is dulsaaran | Shaabadda gudbinta PCB | 50x50mm ~ 400x360mm |
| Fur furka | Shaabadda gudbinta PCB | 50x50mm ~ 400x360mm |
| YAMAHA YSM20R | haddii la geeyo 1 loox | L50xW50mm -L810xW490mm |
| Xawaaraha aragtiyeed ee SMD | 95000CPH(0.027 s/jajab) | |
| Kala duwanaanshaha isku xirka | Dhererka qaybta 0201(mm)-45*45mm: ≤15mm | |
| Saxnaanta isu imaatinka | JIIB+0.035mmCpk ≥1.0 | |
| Tirada qaybaha | 140 nooc (8mm duuban) | |
| YAMAHA YS24 | haddii la geeyo 1 loox | L50xW50mm -L700xW460mm |
| Xawaaraha aragtiyeed ee SMD | 72,000CPH(0.05 s/jajab) | |
| Kala duwanaanshaha isku xirka | Dhererka 0201(mm)-32*mm ee qaybta la rakibayo: 6.5mm | |
| Saxnaanta isu imaatinka | ±0.05mm, ±0.03mm | |
| Tirada qaybaha | 120 nooc (8mm duuban) | |
| YAMAHA YSM10 | haddii la geeyo 1 loox | L50xW50mm ~L510xW460mm |
| Xawaaraha aragtiyeed ee SMD | 46000CPH(0.078 s/jajab) | |
| Kala duwanaanshaha isku xirka | Dhererka 0201(mm)-45*mm ee qaybta la rakibayo: 15mm | |
| Saxnaanta isu imaatinka | ±0.035mm Cpk ≥1.0 | |
| Tirada qaybaha | 48 nooc (8mm giraangirood)/15 nooc oo saxaarado IC otomaatig ah | |
| JT SHAAH-1000 | Jid kasta oo laba-geesood ah waa la hagaajin karaa | W50 ~ 270mm substrate/hal waddo waa la hagaajin karaa W50 * W450mm |
| Dhererka qaybaha ku yaal PCB | sare/hoose 25mm | |
| Xawaaraha geynta | 300~2000mm/ilbiriqsi | |
| ALeader ALD7727D AOI khadka tooska ah | Xallinta/Muuqaalka baaxadda/Xawaaraha | Ikhtiyaar: 7um/pixel FOV: 28.62mmx21.00mm Caadiga: 15um pixel FOV: 61.44mmx45.00mm |
| Helitaanka xawaaraha | ||
| Nidaamka koodka baarka | Aqoonsiga koodka baarka otomaatiga ah (koodka baarka ama lambarka QR) | |
| Kala duwanaanshaha cabbirka PCB | 50x50mm (ugu yaraan) ~510x300mm (ugu badnaan) | |
| 1 waddo ayaa la hagaajiyay | 1 raad waa la hagaajiyay, 2/3/4 raad waa la hagaajin karaa; cabbirka ugu yar ee u dhexeeya 2 iyo 3 raad waa 95mm; cabbirka ugu badan ee u dhexeeya 1 iyo 4 raad waa 700mm. | |
| Khad keliya | Ballaca ugu badan ee wadada waa 550mm. Wadada laba-laaban: ballaca ugu badan ee wadada laba-laaban waa 300mm (ballac la cabbiri karo); | |
| Kala duwan oo dhumucdiisuna tahay PCB | 0.2mm-5mm | |
| Ansixinta PCB ee u dhaxaysa sare iyo hoose | Dhinaca sare ee PCB: 30mm / dhinaca hoose ee PCB: 60mm | |
| 3D SPI SINIC-TEK | Nidaamka koodka baarka | Aqoonsiga koodka baarka otomaatiga ah (koodka baarka ama lambarka QR) |
| Kala duwanaanshaha cabbirka PCB | 50x50mm (ugu yaraan) ~630x590mm (ugu badnaan) | |
| Saxnaanta | 1μm, dherer: 0.37um | |
| Ku celcelinta | 1um (4sigma) | |
| Xawaaraha goobta muuqaalka | 0.3s/goobta muuqaalka | |
| Waqtiga ogaanshaha barta tixraaca | 0.5s/dhibic | |
| Dhererka ugu badan ee ogaanshaha | ±550um ~ 1200μm | |
| Dhererka ugu badan ee cabbirka PCB-ga ee rogrogmada | ±3.5mm~±5mm | |
| Kala fogaanshaha ugu yar ee suufka | 100um (oo ku salaysan suufka cidhifka ah oo dhererkiisu yahay 1500um) | |
| Cabbirka ugu yar ee tijaabada | leydi 150um ah, wareegsan 200um | |
| Dhererka qaybta ku taal PCB | sare/hoose 40mm | |
| Dhumucda PCB | 0.4 ~ 7mm | |
| Qalabka ogaanshaha X-Ray ee Unicomp 7900MAX | Nooca tuubada iftiinka | nooca xiran |
| Danab tuubada | 90kV | |
| Awoodda ugu badan ee wax soo saarka | 8W | |
| Cabbirka diiradda la saarayo | 5μm | |
| Baaraha | FPD-ga qeexitaanka sare leh | |
| Cabbirka Pixel-ka | ||
| Cabbirka ogaanshaha wax ku oolka ah | 130*130[mm] | |
| Matrix-ka Pixel-ka | 1536*1536[pixel] | |
| Heerka qaab-dhismeedka | 20fps | |
| Weyneynta nidaamka | 600X | |
| Meelaynta hagitaanka | Si dhakhso ah ayay u heli kartaa sawirrada muuqaalka ah | |
| Cabbiraadda otomaatiga ah | Si toos ah ayay u cabbiri kartaa xumbo ku jira qalabka elektarooniga ah ee baakadaysan sida BGA & QFN | |
| ogaanshaha otomaatiga ah ee CNC | Taageer isku darka hal dhibic iyo matrix, si dhakhso ah u soo saar mashaariic oo sawir iyaga | |
| Ballaarinta Joomatari | 300 jeer | |
| Qalabka cabbirka ee kala duwan | Taageer cabbiraadaha joomatari sida masaafada, xagasha, dhexroorka, geesoolaha, iwm. | |
| Waxay ku ogaan kartaa muunadaha xagal 70 darajo ah | Nidaamku wuxuu leeyahay weyneyn ilaa 6,000 | |
| Ogaanshaha BGA | Weynayn weyn, sawir cad, iyo kala-goysyada alxanka BGA iyo dildilaaca daasadda oo si fudud loo arki karo | |
| Masraxa | Awood u leh meelaynta tilmaamaha X, Y iyo Z; Meelaynta jihada ee tuubooyinka raajada X iyo qalabka lagu ogaado raajada X | |