Ikon Taro na PCB
SMT, cikakken sunan shine fasahar hawa saman. SMT hanya ce ta ɗora sassan ko sassan a kan allunan. Saboda kyakkyawan sakamako da ingantaccen aiki, SMT ta zama babbar hanyar da ake amfani da ita wajen haɗa PCB.
Fa'idodin taron SMT
1. Ƙaramin girma da nauyi
Amfani da fasahar SMT don haɗa abubuwan haɗin kai tsaye a kan allo yana taimakawa wajen rage girman gaba ɗaya da nauyin PCBs. Wannan hanyar haɗawa tana ba mu damar sanya ƙarin abubuwan haɗin a cikin sarari mai iyaka, wanda zai iya cimma ƙira mai sauƙi da ingantaccen aiki.
2. Babban aminci
Bayan an tabbatar da samfurin, dukkan tsarin haɗa SMT zai kusan sarrafa kansa ta hanyar amfani da na'urori masu inganci, wanda hakan ke rage kurakuran da ka iya faruwa sakamakon shigar hannu. Godiya ga sarrafa kansa, fasahar SMT tana tabbatar da aminci da daidaiton PCBs.
3. Tanadin kuɗi
Attachment na SMT yawanci ana samunsa ta hanyar injina ta atomatik. Duk da cewa farashin shigar da injina yana da yawa, injinan ta atomatik suna taimakawa wajen rage matakan hannu yayin aiwatar da SMT, wanda hakan ke inganta ingantaccen samarwa sosai kuma yana rage farashin aiki a cikin dogon lokaci. Kuma akwai ƙarancin kayan da ake amfani da su fiye da haɗa rami, kuma farashin zai ragu.
| Ƙarfin SMT: maki 19,000,000/rana | |
| Kayan Gwaji | Na'urar gano X-RAY mara lalatawa, Na'urar gano abu na farko, A0I, na'urar gano ICT, Kayan aikin sake fasalin BGA |
| Saurin Hawa | 0.036 S/pcs (Mafi kyawun Matsayi) |
| Takamaiman Kayan Aiki. | Mafi ƙarancin fakitin da za a iya mannewa |
| Mafi ƙarancin daidaiton kayan aiki | |
| Daidaiton guntu na IC | |
| Bayanin PCB da aka sanya. | Girman ƙasa |
| Kauri na ƙasa | |
| Yawan Farawa | 1. Rabon Ƙarfin Impedance: 0.3% |
| 2. IC ba tare da bugun iska ba | |
| Nau'in Allo | POP/PC/FPC/Rigid-Flex PCB/PCB mai tushen ƙarfe |
| Ƙarfin DIP na Kullum | |
| Layin toshe-in DIP | Maki 50,000/rana |
| Layin solder na DIP | Maki 20,000/rana |
| Layin gwajin DIP | 50,000pcs PCBA/rana |
| Ikon Kera Kayan Aikin SMT Mai Girma | ||
| Inji | Nisa | Sigogi |
| Firinta GKG GLS | Buga PCB | 50x50mm~610x510mm |
| daidaiton bugu | ±0.018mm | |
| Girman firam ɗin | 420x520mm-737x737mm | |
| kewayon kauri na PCB | 0.4-6mm | |
| Na'urar haɗakarwa mai tarin yawa | Hatimin jigilar PCB | 50x50mm~400x360mm |
| Buɗewa | Hatimin jigilar PCB | 50x50mm~400x360mm |
| YAMAHA YSM20R | idan aka kawo allo 1 | L50xW50mm -L810xW490mm |
| Saurin ka'idar SMD | 95000CPH(0.027 s/guntu) | |
| Jerin Haɗawa | 0201(mm)-45*45mm tsayin kayan da aka saka: ≤15mm | |
| Daidaiton Taro | CHIP+0.035mmCpk ≥1.0 | |
| Adadin abubuwan da aka gyara | Nau'ikan 140 (gungura ta 8mm) | |
| YAMAHA YS24 | idan aka kawo allo 1 | L50xW50mm -L700xW460mm |
| Saurin ka'idar SMD | 72,000CPH(0.05 s/guntu) | |
| Jerin Haɗawa | Tsawon abin da aka saka a cikin kayan aiki: 0201(mm)-32*mm | |
| Daidaiton Taro | ±0.05mm, ±0.03mm | |
| Adadin abubuwan da aka gyara | Nau'ikan 120 (gungura ta 8mm) | |
| YAMAHA YSM10 | idan aka kawo allo 1 | L50xW50mm ~L510xW460mm |
| Saurin ka'idar SMD | 46000CPH(0.078 s/guntu) | |
| Jerin Haɗawa | Tsawon abin da aka saka 0201(mm)-45*mm: 15mm | |
| Daidaiton Taro | ±0.035mm Cpk ≥1.0 | |
| Adadin abubuwan da aka gyara | Nau'ikan 48 (8mm reel)/nau'ikan tire na IC na atomatik guda 15 | |
| JT SHAYI-1000 | Kowace hanya mai layi biyu tana da daidaito | W50 ~ 270mm substrate/waƙa ɗaya ana iya daidaita shi W50 * W450mm |
| Tsawo na kayan da aka gyara akan PCB | sama/ƙasa 25mm | |
| Saurin jigilar kaya | 300~2000mm/sec | |
| ALeader ALD7727D AOI akan layi | ƙuduri/Kewayon gani/Gudu | Zaɓi: 7um/pixel FOV: 28.62mmx21.00mm Daidaitacce: 15um pixel FOV: 61.44mmx45.00mm |
| Gano saurin | ||
| Tsarin lambar mashaya | Gano lambar mashaya ta atomatik (lambar mashaya ko lambar QR) | |
| Kewayon girman PCB | 50x50mm(min)~510x300mm(mafi girma) | |
| An gyara waƙa 1 | An gyara hanya 1, ana iya daidaita hanya 2/3/4; girman da ke tsakanin hanya 2 da 3 shine 95mm; matsakaicin girman tsakanin hanya 1 da 4 shine 700mm. | |
| Layi ɗaya | Matsakaicin faɗin hanya shine 550mm. Hanya biyu: matsakaicin faɗin hanya biyu shine 300mm (faɗin da za a iya aunawa); | |
| Kewayon kauri na PCB | 0.2mm-5mm | |
| PCB sharewa tsakanin sama da ƙasa | Babban gefen PCB: 30mm / Babban gefen PCB: 60mm | |
| 3D SPI SINIC-TEK | Tsarin lambar mashaya | Gano lambar mashaya ta atomatik (lambar mashaya ko lambar QR) |
| Kewayon girman PCB | 50x50mm(min)~630x590mm(mafi girma) | |
| Daidaito | 1μm, tsayi: 0.37um | |
| Maimaitawa | 1um (4sigma) | |
| Gudun filin gani | 0.3s/filin gani | |
| Lokacin gano wurin tunani | 0.5s/maki | |
| Matsakaicin tsayin ganowa | ±550um~1200μm | |
| Matsakaicin tsayin aunawa na PCB mai lanƙwasa | ±3.5mm~±5mm | |
| Mafi ƙarancin tazara tsakanin faifan | 100um (bisa ga sandar soler mai tsayin 1500um) | |
| Mafi ƙarancin girman gwaji | murabba'i mai kusurwa 150um, zagaye 200um | |
| Tsawo na bangaren a kan PCB | sama/ƙasa 40mm | |
| Kauri na PCB | 0.4~7mm | |
| Na'urar gano X-Ray ta Unicomp 7900MAX | Nau'in bututun haske | nau'in da aka rufe |
| Ƙarfin bututu | 90kV | |
| Matsakaicin ƙarfin fitarwa | 8W | |
| Girman mayar da hankali | 5μm | |
| Mai ganowa | babban ma'anar FPD | |
| Girman pixel | ||
| Girman ganowa mai inganci | 130*130[mm] | |
| Matrix na pixel | 1536*1536[pixel] | |
| Matsakaicin firam | 20fps | |
| Ƙara girman tsarin | 600X | |
| Matsayin kewayawa | Zai iya gano hotunan zahiri cikin sauri | |
| Aunawa ta atomatik | Zai iya auna kumfa ta atomatik a cikin kayan lantarki da aka shirya kamar BGA & QFN | |
| Gano atomatik na CNC | Tallafawa ƙarin maki ɗaya da matrix, samar da ayyuka cikin sauri kuma ku yi tunanin su | |
| Ƙara girman lissafi | Sau 300 | |
| Kayan aikin aunawa iri-iri | Goyi bayan ma'aunin geometric kamar nisa, kusurwa, diamita, polygon, da sauransu | |
| Zai iya gano samfurori a kusurwar digiri 70 | Tsarin yana da girman girma har zuwa 6,000 | |
| Gano BGA | Girman girma, hoto mai haske, da kuma sauƙin ganin haɗin haɗin BGA da fasawar tin | |
| Matakin mataki | Mai iya sanyawa a cikin alkiblar X, Y da Z; Matsayin alkiblar bututun X-ray da na'urorin gano X-ray | |